‘- Dorsal Bladder Development
– Last 420 Nylon Bladder –
Cressi Lock-Aid System Built-in
Rear Lateral Positioning System – 3 deflation bleeds: one on the upper part of the hose, one with control carried
on the right side of the shoulder and the third on the lower right side of the bladder
– 2 rings D-ring of 50 mm aluminum on the shoulder straps
– 2 rings D-ring of 25 mm aluminum on the pockets
– Harnesses Ultralight
RIB – New Generation Anatomic Inflator with Hose Support
– Multi-Function Pockets with Zipper and Pockets for Leads Inside
– 40 mm shoulder straps with quick-release buckles
– Adjustable side lobes

Size: XS, S, M, L, XL


Cressi Scorpion BCD

Cressi Scorpion BCD is a jacket with 100% dorsal volume very versatile for all types of diving, with a sturdy but lightweight construction at the same time (2,450 kg size M) and with a low transport volume but robust and very flexible.

The harness system, completely independent of the bladder, provides absolute stability of the jacket on the diver and completely releases oppression of the chest, axillary and abdominal area due to the expansion of the bladder to the outside of the dorsal area and surrounding the tank.

Their pattern and arrangement of harnesses make it 100% unisex.


  • Shoulder pads with internal seams to avoid any friction even diving without suit.
  • Ventral strap with tension system.
  • Abdominal area with low profile lobes and large zipper accessory pockets.
  • High-capacity dorsal air chamber (19 kg size M) but with an external volume of stowage always contained, thanks to the elastic containment tensioners that have as an additional mission to facilitate the emptying manoeuvre and avoid displacement of the air during the dive that  It would cause instability.
  • Foldable structure.
  • Fully covered harness with a comfortable neutral buoyancy padding made of a closed cell material that avoids the accumulation of water or air and, therefore, reduces the inherent buoyancy of the jacket and facilitates quick drying.
  • LAS (Lock Aid System) 2.0 ballast system, vertically located in line with the tank, behind the pockets and perfectly integrated in the profile of the jacket.
  • Direct System Inflator:
    Push button with wide clearances with respect to its seat to avoid the blocking action of the sand grains.
  • Vacuum button with sealing using a silicone washer.
  • Push button integrated into profile to avoid unwanted inflation when pulling the hose to empty.
  • New very resistant hose of very progressive curvature.
  • New upper low profile exhaust valve with a non-return valve that prevents the entry of accidental water.
  • 4 ABS rings.
  • “Y” hose holder.
  • Combination of 420 D Nylon + 3 other fabrics.


More from this brand

You may also like